Skip to main content
Press Releases

M2M Connectivity introduces the VeraPhase™ 6000 High Precision GNSS Antenna Series from Tallysman™

By 20/09/2015June 20th, 2022No Comments

Melbourne, Australia –  September 21, 2015:M2M Connectivity is pleased to introduce the VeraPhase™ 6000 High Precision GNSS Antenna Series from Tallysman’s GNSS antenna range to Australia and New Zealand.  Tallysman, based in Canada, is a leading manufacturer of high performance, high quality GNSS antennas that are focussed on the requirements for precision and
multi-constellational GNSS receivers.
The VeraPhase™ 6000 High Precision GNSS Antenna Series antennas provide:
–  lowest axial ratios (horizon to horizon, through all azimuths),
–  for all GNSS frequencies (<0.5dB at zenith, <2 dB at horizon),
–  excellent front to back ratios at all elevations, high efficiency (>70%),
–  a tight PCV (± 1mm through all frequencies, azimuths, and elevations),
–  a consistent PCO through all frequencies.
The performance of theVeraPhase™ rivals that of choke ring antennas but is much lighter, smaller, and more economical.  All these features make this antenna family ideal for use in survey, precision RTK, and Reference antenna applications.
The VeraPhase 6000 High Precision GNSS Antennaalso provides an available PCB within the base of the antenna for integration of a custom system board such as a dual band or RTK GNSS receivers or other applications.
The VP6000 family provides high receive RHCP gain over the full GNSS spectrum: Low GNSS band (1164MHz to 1300MHz), L-band correction services (1525MHz to 1559MHz), and High GNSS band (1559MHz to 1610 MHz).  Each model features a robust, high IP3, pre-filtered LNA to minimize
de-sensing from high-level out-of-band signals, including 700MHz LTE, and that yet still provides a noise figure of less than 2.5dB.  Non-pre-filtered versions are also available with a noise figure of less than 1.5dB.
Each antenna has a well defined Phase Centre Offset relative to the Antenna Reference Plane and is available in different formats.
View Veraphase 6000 GNSS antenna white paper here.
For more information about Tallysman VeraPhase™ 6000 High Precision GNSS Antenna Series, contact M2M Connectivity at:
Ph: +61-3-96963011
About M2M Connectivity
M2M Connectivity is a specialist hardware distributor and provider of support services for the wireless M2M and IoT market in Australia and New Zealand. Our product portfolio of modules, modems and gateways/routers provide connectivity solutions for cellular (LTE, 3G/NextG, GSM) and Satellite (Iridium, Inmarsat, Globalstar Simplex, Orbcomm,) and short range RF.  We distribute the NVS GNSS/GPS receiver range for applications requiring higher accuracy positioning and the Tallysman distributorship enhances our focus on this growing GNSS market.
About Tallysman
Tallysman is a leading manufacturer of high performance, high quality products for a wide range of Global Navigation Satellite Systems (GNSS) applications.  Tallysman’s mission is to provide GNSS antennas which meet the needs of a new generation of positioning systems providing unprecedented accuracy at ever decreasing prices.  Tallysman manufactures its products and is headquartered in Ottawa, Canada. (

Close Menu