- Q-Puck
- Q-Pro 3G/Iridium/GPS Modem
- Q-Pro Dual-mode Iridium/GSM/GPS
- Q4000 Iridium/GSM/GPS Modem
- Q9602 Iridium SBD Modem
- Q9603 Iridium SBD Modem
- Q9612 Iridium SBD Modem
- Q-Pro Dual-mode Orbcomm/GSM/GPS
- Q9523 Iridium Modem
- Q4000 Dual-mode Orbcomm/GSM/GPS
- DS300 Satellite Modem
- Q4000 Orbcomm+GPS
- Q1000 Orbcomm Modem
- iQ
- Q9601 Iridium SBD Modem
- Q1400 Orbcomm Modem
Quake DS300 Satellite Modem
Overview
The DS-300 is a programmable ORBCOMM modem that includes a robust satellite modem, GPS, an on-board application processor, power conditioning circuitry, battery charger and several digital and analog IO’s.
Its built-in application development environment decreases time to market while Stellar’s exclusive StelComm utility simplifies set-up and configuration.
The DS300 offers robust design targeted to satisfy the transportation, heavy equipment, marine, aeronautical as well as many other markets.
Key Features
- Orbcomm Duplex Satellite Modem
- Integrated GPS
- Configurable I/O's
- 8 Digital Channels (Input or Output)
- 4 Analog Channels (Input)
- Ruggedized Automotive Grade Aluminium Case
- Programmable Application Processor
- Integrated Battery Charger
- Selectable Voltage Options to a Max of 24 V DC
- Automotive Grade FAKRA Connectors
Specifications
Frequency Range (MHz)
Transmit Frequency 148 - 150.05 MHz
Receive Frequency 137 to 138 MHz
Core processor
Atmel Mega 128
Memory
128K Flash memory, 4K RAM, 4K EEPROM
Digital Inputs/Outputs
8 Digital I/O
Configured as Inputs or Outputs
Communications Interfaces
2 RS232 Serial Ports
Main Serial Port and Auxillary Serial Port
Analogue Interfaces
4 Analog Inputs
RF Connector
FARKRA SMB Male
System/IO Connector
Delphi 36-pin Male connector
Power Supply
Battery Power - 8 to 16V
External Power - 9 to 30V
Current Consumption
Transmit: 2.0 A max @ 12 VDC
GPS: 22 mA nominal, 25 mA max @ 12 VDC
Receive: 85 mA max @ 12 VDC
Sleep: 50 uA nominal, 100 uA max @ 12 VDC
Carrier Approvals
Orbcomm
Environmental
Operating Temperature: -40°C to +85°C
Storage Temperature: -50°C to +85°C
Vibration: SAEJ1455
Shock: SAEJ1455
Humidity: 95% relative humidity at 40°C
Salt Fog: 5% solution
Pressure Wash: MIL SPEC 506.1
Dust Exposure: SAEJ726B
Altitude: 9 PSI/-10°C
Radiated Emissions: EN 300 721
Electrostatic Discharge: SAEJ1113/13
Electrical Interference: SAEJ1113/12
Dimensions/Size
206 x 86 x 38 mm
Related Products
The AT300-1 Half Wave (1/2) antenna used with the Orbcomm + GPS modems and has a mounting bracket and includes two RF cables (VHF/GPS). This antenna can be used for mobile and fixed site applications.
The AT300-3 Quarter Wave (1/4) antenna used with the Orbcomm + GPS modems has a screw mount and includes two RF cables (VHF/GPS). This antenna is ideal for mobile applications. It typically is...
The AT300-3 Quarter Wave (1/4) antenna for Orbcomm + GPS modems has a magnetic mount and includes two RF cables (VHF/GPS). This antenna is ideal for mobile applications. It typically is located (...
The AT300-4 Eighth Wave (1/8) Orbcomm + GPS antenna used with the DS300 and Q1400 modems has a Screw (roof) mount and includes two RF cables (VHF/GPS). This antenna could be used in marine...
The AT300-5 Eighth Wave (1/8) Orbcomm + GPS antenna used with the DS300 and Q1400 modems has a magnetic mount and includes two RF cables (VHF/GPS). This antenna could be used in marine environments...
The DS300 21-wire pigtail can be used to interface the DS300 Satellite Modem with external I/O's, Serial Ports, External Power and Battery Power
GPS 916 VHF/FAKRA GPS roof mount antenna with 5m cable. Roof mount antenna for GPS and ORBCOMM for car navigation, traffic guidance systems, fleet management
GPS Multi M kit with magnetic base, rod and cable.
Roof mount antenna with Flex antenna, VHF rod and 6m cable.
GPS Multi S Kit with screwbase, rod, short cable.
Roof mount antenna with Flex antenna VHF rod and short cable .
The DS300 Quick Start Kit will allow you to quickly send and receive messages over the ORBCOMM network.The Kit also allows you to test the Stellar Position Report Application which does not need any...
The DS300 Quick Start Kit will allow you to quickly send and receive messages over the ORBCOMM network. The Kit also allows you to test the Stellar Position Report Application which does not need any...
Developers
Access to Quake DS300 Satellite Modem Documentation and FAQs is restricted to developers. Please Login or Register to become a developer.


















