- Q1000 Orbcomm Modem
- Q4000 Orbcomm+GPS
- Q4000 Dual-mode Orbcomm/GSM/GPS
- Q-Pro Dual-mode Orbcomm/GSM/GPS
- Q-Pro 3G/Iridium/GPS Modem
- Q4000 Iridium Modem with optional GSM and GPS
- Q-Pro Dual-mode Iridium/GSM/GPS
- Q9602 Iridium SBD Modem
- Q9612 Iridium SBD Modem
- Q9601 Iridium SBD Modem
- Q1400 Orbcomm Modem
- iQ
Quake Q1000 Orbcomm Modem
Overview
The Q1000 is QUAKE’s lowest priced ORBCOMM modem. The modem incorporates the latest ORBCOMM technology, and presents a footprint approximately ½ the size of the smallest existing modem. Further, the Q1000 provides a simple serial interface that allows solutions to be integrated with minimal software development, and very little external processing hardware. This interface supports operations with simple, programmable, serial sensors.
Key Features
- Multiple Hardware Configurations
- Low Cost Transceiver
- Small, low-profile footprint
- Orbcomm Serial Interface
- Withstands 12V Automotive Transients
Specifications
Frequency Range (MHz)
Transmit Frequency 148 - 150.05 MHz
Receive Frequency 137 to 138 MHz
Weight
100 grams
Communications Interfaces
RS-232
CMOS
RF Connector
MCX Female
SMA Female
Power Supply
9 to 18V DC
Current Consumption
Sleep <5uA
Receive 70mA
Transmit 2.0A
Carrier Approvals
Orbcomm
Certifications and Compliance
EMI: ETSI 301-721
EMC:ETSI 300-832
Environmental
Operating Temperature: -40C to +85C
Storage Temperature: -50C to +85 C
Shock: 20G, 11mS ½ Sine Wave
Vibration Design: 8G’s RMS, 20-2,000Hz
ESD: Contact Discharge 4 kV, Air Discharge 15 kV
Dimensions/Size
2.50” x 2.50” x 0.63”
Related Products
The AT100-1 Half Wave antenna used with the DS100/Q1000 has a mounting bracket that includes an RF Cable. This antenna can be used for mobile and fixed site applications.
The AT100-2 Quarter Wave antenna used with the DS100/Q1000 modem has a magnetic mount and includes an RF Cable. This antenna is ideal for mobile applications. It typically is located (centered) on...
The AT100-3 Quarter Wave antenna used with the DS100/Q1000 modem has a screw mount and includes an RF Cable. This antenna is ideal for mobile applications. It typically is located (centered) on the...
Orbcomm only 1/4 wave screw mount kit with base, rod, cable and MCXm (male) connector.
Hirschmann Orbcomm Only 1/4 wave VK Super Low Loss Cable with FME.
Orbcomm Only 1/4 wave low profile dipole film antenna with MCXm connector.
















