connectBlue OWL222a WLAN Module (SDIO)
Overview
Developed for integration in industrial devices, the OEM Wireless LAN module 222a provides state of the art low power features. The accompanying software driver works as the interface between the TCP/IP stack in the device and the module. The module minimizes the work needed to implement Wireless LAN (IEEE 802.11a/b/g/n) in a device. It is developed for reliable, high demanding industrial devices and applications. The driver is available for Linux, WinCE and embedded systems and may be adapted for any micro controller.
Order Code:
Internal antenna SDIO Module - cB-OWL222ai-04-0
External antenna SPI Module - cB-OWL222ax-04-0
Visit the OWL222a product support page for software downloads and technical documentation.
Key Features
- Supports 802.11a/b/g/n
- 802.11n single-stream
- 802.11n space time block code for extended range and throughput
- SDIO v2.0 Host interface (supports SPI, SD 1-bit, or 4-bit modes)
Order Number:
cB-OWL222a
Specifications
Operational Bands (MHz)
WLAN 2400
Current Consumption
Deep sleep mode: 0.2 mA@3.6VDC
Sleep mode, connected: 0.8 mA@3.6VDC (average)
Active mode, transmitting at 24 Mbps: 170 mA@3.6VDC (average)
Max output power: +17dBm
Type Approval
FCC
RoHS
A-Tick
C-Tick
CE
Pb
EMC
Certifications and Compliance
EN 300 328 V1.7.1 (2006-10)
EN 301 489-1 V1.8.1 (2008-04)
EN 301 489-17 V1.2.1 (2002-08)
EN 61000-6-2 (2005)
EN 60950-1:2001 and/or IEC 60950-1:2001 (1st Edition)
EN 60950-1/A11:2004 + Corrigendum:2004
Environmental
Maximum operating temperature: -30 to +85 °C
Humidity RH 5-90% non-condensing
Shock and vibration: IEC 61131-2
Dimensions/Size
23 x 36 x 3.2 mm
Related Products
The WinCE/WinXP cB-OWL222a Development Kit consists of the following:
The WinCE cB-OWL221a and cB-OWL222a Development Kit consists of the following:
The Linux cB-OWL2221a development kit consist of the following:
Dual-band 2.4/5 GHz 1/2 wave length antenna (11 cm) with SMA or RPSMA connector. 90 degree tiltable
Developers
Access to connectBlue OWL222a WLAN Module (SDIO) Documentation and FAQs is restricted to developers. Please Login or Register to become a developer.
